KYOCERA TCG070WVLDEDNN-AN30 7 inch WVGA 800×480 TFT LCD screen, 700cd/m², 1000:1 contrast, LVDS 30pin

The TCG070WVLDEDNN-AN30 is a 7.0-inch a-Si TFT-LCD module produced by KYOCERA. It delivers WVGA resolution of 800(RGB)×480 with a 15:9 aspect ratio and RGB vertical stripe pixel arrangement. Featuring 700 cd/m² typical brightness and 1000:1 contrast ratio, this TN normally white transmissive panel adopts matte anti-glare surface treatment for clear display performance. It uses WLED backlight with a 100,000-hour service life and integrated LED driver. The signal interface is LVDS (1 ch, 6/8-bit) with 30-pin, 1.0mm terminal. This non-touch LCD module supports working temperature from -20℃ to +70℃ and storage temperature ranging from -30℃ to +80℃, which is widely used for industrial HMI and embedded control equipment.

• 7.0-inch a-Si TFT-LCD module, 800(RGB)×480 WVGA resolution, 15:9 aspect ratio
• Typical brightness: 700 cd/m², contrast ratio 1000:1 (Transmissive)
• TN mode, normally white, transmissive type, matte anti-glare surface
• Recommended viewing direction: 6 o'clock; viewing angle: 80/80/60/80 (Typ.) (CR≥10), response time 5/25 ms (Tr/Td)
• Display colors: 262K / 16.7M, 49% NTSC color gamut, refresh rate 60Hz
• WLED backlight, 100,000 hours lifespan with built-in LED driver
• Signal interface: LVDS (1 ch, 6/8-bit), 30 pins, 1.0mm terminal
• Supply voltage: 3.3V (Typ.), no touch function
• Active area: 152.4(W) ×91.44(H) mm; Outline dimension: 165(W)×104.4(H)×9.1(D) mm
• Panel weight: 210g (Typ.)
• Operating temperature: -20 ~ +70 ℃; Storage temperature: -30 ~ +80 ℃

Industrial HMI, factory automation control terminals, test & measuring instruments, embedded industrial devices, medical auxiliary equipment.